交换机配置- 使用channel方式封装子接口(2)

作者: 佚名 出处:网侠2007　2008-05-06 16:13　   砖    好    评论  条 　进入论坛

阅读提示：文中详细介绍了channel方式封装子接口的使用方法。

以下是该方式的一个完整示例：
L2：（采用PAgP协议）
Set vlan 1 2/1-2
set port channel 2/1-2 mode on
set trunk 2/1  on dot1q 1-1005
set trunk 2/2  on dot1q 1-1005
L3：
version 12.0
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service passWord-encryption
!
hostname M-4006R-NN
!
boot system flash bootflash:cat4232-in-mz.120-18.W5.22b.bin
enable secret 5
!
interface Loopback0
ip address
no ip directed-broadcast
!
interface Port-channel1
no ip address
no ip directed-broadcast
hold-queue 300 in
!
interface Port-channel1.1
description manage-vlan
encapsulation dot1Q 1 native
no ip directed-broadcast
!
interface Port-channel1.2
description local Management
encapsulation dot1Q 2
no ip directed-broadcast
!
interface Port-channel1.76
description uplink to
encapsulation dot1Q 76
ip address XXXX
no ip directed-broadcast
!        
interface Port-channel1.201
description PPPoE test 2002.8.1
encapsulation dot1Q 201
ip address 192.168.1.2 255.255.255.0
no ip directed-broadcast
!
interface FastEthernet1
no ip address
no ip directed-broadcast
shutdown
!
interface GigabitEthernet1
no ip address
no ip directed-broadcast
shutdown
!
interface GigabitEthernet2
no ip address
no ip directed-broadcast
shutdown
!
interface GigabitEthernet3
no ip address
no ip directed-broadcast
no negotiation auto
channel-group 1
!
interface GigabitEthernet4
no ip address
no ip directed-broadcast
no negotiation auto
channel-group 1
!
ip classless
ip route 0.0.0.0 0.0.0.0
end

【相关文章】

• 一个经典配置包括Catalyst6509 4006交换机配置方案

共2页: 上一页 [1] 2

【内容导航】  第 1 页：配置步骤  第 2 页：完整示例